1037388123 Bosch EDC16CP31 map pack – Jeep Laredo 3.0 V6 CRD Dpf 218hp
SW
1037388123Injection System16Limiters8Turbo System7Engine Torque4Rail4
This pack holds 39 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Jeep Laredo 3.0 V6 CRD Dpf 218hp · Bosch EDC16CP31
Also written: 1 037 388 123
More packs: Bosch EDC16CP31
All 39 maps
The percentage beside a name: the share of the 238 Bosch EDC16CP31 packs that name it too.
Injection System 16 maps
- Fuel quantity injected f(RPM,Trq)100%
- Injection time99%
- Injection timing - Main Injection Base Map 199%
- Injection timing - Main Injection Base Map 297%
- Injection timing - Main Injection Base Map 394%
- Fuel quantity limiter7 maps · 91%
- Injection timing - Main Injection Base Map 440%
- Injection timing - Main Injection Base Map 540%
- Smoke limitation - Lower Lambda value2 maps · 39%
Limiters 8 maps
- Maximum speed of vehicle7 maps · 52%
- Idle engine speed3%
Turbo System 7 maps
- Turbo pressure3 maps · 100%
- Limiter of Turbo pressure3 maps · 45%
- Wastegate Duty Cycle9%
Engine Torque 4 maps
- Maximum torque for first gear100%
- Torque during cranking f(RPM,ECT)100%
- Torque request during standard condition100%
- Torque request during take off condition18%
Rail 4 maps
- Rail pressure2 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)97%
- Rail pressure limiter f(RPM,Fuel_T)95%
How this pack differs from other Bosch EDC16CP31 packs
Named here, but by under half of the 238 Bosch EDC16CP31 packs:
- Idle engine speed 3%
- Wastegate Duty Cycle 9%
- Torque request during take off condition 18%
- Smoke limitation - Lower Lambda value 39%
- Injection timing - Main Injection Base Map 4 40%
- Injection timing - Main Injection Base Map 5 40%
- Limiter of Turbo pressure 45%
Named by at least half of them, but not by this pack:
- Maximum torque for forth gear 99%
- Maximum torque for second gear 99%
- Maximum torque for sixth gear 99%
- Maximum torque for third gear 99%
- Maximum torque for fifth gear 99%
- Maximum torque for reverse gear 99%
- Variable geometry (VGT) or wastegate (WG) control 89%
- Torque limiter at gearbox input 87%
- Maximum torque for seventh gear 76%
- Limiter of Turbo pressure f(APS) 74%
- EGR control - Closing percentage 51%
39 maps against the Bosch EDC16CP31 median
The 238 Bosch EDC16CP31 packs name 22 to 76 maps, median 43; 44% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 16 | 13 |
| Limiters | 8 | 1 |
| Turbo System | 7 | 7 |
| Engine Torque | 4 | 12 |
| Rail | 4 | 5 |
| Air Control | 0 | 2 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.