07611397 07628410 Siemens MSD80 map pack – BMW 3 Series 3.0 306hp
07611397SW07628410CALPW80890This pack holds 94 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW 3 Series 3.0 306hp · Siemens MSD80
More packs: BMW 3 Series · Siemens MSD80
All 94 maps
The percentage beside a name: the share of the 15 Siemens MSD80 packs that name it too.
Variable Valve Timing (VVT) 22 maps
- Exhaust - Catalyst protection4 maps · 87%
- Exhaust - High speed2 maps · 87%
- Exhaust - Low speed2 maps · 87%
- Intake - High speed2 maps · 87%
- Intake - Low speed2 maps · 87%
- Exhaust3 maps · 47%
- Intake - Catalyst protection4 maps · 47%
- Intake3 maps · 40%
Engine Torque 19 maps
- Limiter of Maximum torque3 maps · 100%
- Optimal engine torque3 maps · 100%
- Torque request during take off condition3 maps · 53%
- Torque request during standard condition47%
- Engine torque correction40%
- Maximum engine torque correction f(ECT_T)40%
- Torque limiter for clutch protection5 maps · 40%
- Torque monitoring2 maps · 40%
Spark Advance 17 maps
- Optimal Spark Advance4 maps · 100%
- Spark Advance at full load2 maps · 100%
- Spark Advance base map5 maps · 100%
- Limiter of knocking sensor6 maps · 40%
Limiters 12 maps
- RPM Limiter6 maps · 100%
- Maximum speed of vehicle6 maps · 87%
Turbo System 9 maps
- Limiter of Turbo pressure6 maps · 67%
- Wastegate Duty Cycle2 maps · 67%
- Limiter of Turbo pressure f(IAT)40%
Air Control 8 maps
- Airflow mass through throttle valve100%
- Requested engine load4 maps · 100%
- Throttle valve - operating angle100%
- Reference of maximum throttle valve angle60%
- Engine load limiter40%
Injection System 6 maps
- Injection base map3 maps · 100%
- Lambda for component protection73%
- Injection at full load47%
- Requested Lambda47%
Rail 1 map
- Rail pressure53%
How this pack differs from other Siemens MSD80 packs
Named here, but by under half of the 15 Siemens MSD80 packs:
- Engine load limiter 40%
- Engine torque correction 40%
- Intake 40%
- Limiter of Turbo pressure f(IAT) 40%
- Limiter of knocking sensor 40%
- Maximum engine torque correction f(ECT_T) 40%
- Torque limiter for clutch protection 40%
- Torque monitoring 40%
- Exhaust 47%
- Injection at full load 47%
- Intake - Catalyst protection 47%
- Requested Lambda 47%
- Torque request during standard condition 47%
Named by at least half of them, but not by this pack:
- Catalytic converter Diagnosis (1=ON, 0=OFF) 60%
94 maps against the Siemens MSD80 median
The 15 Siemens MSD80 packs name 35 to 112 maps, median 53; 60% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Variable Valve Timing (VVT) | 22 | 13 |
| Engine Torque | 19 | 6 |
| Spark Advance | 17 | 11 |
| Limiters | 12 | 7 |
| Turbo System | 9 | 5 |
| Air Control | 8 | 7 |
| Injection System | 6 | 5 |
| Rail | 1 | 1 |
| Deactivations | 0 | 2 |
Other SW versions on HW 07611397
2 SW versions sit on this HW in the archive, 8 files in all. The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 07628324 | BMW 3 Series 3.0 306hp N55B30M0 | 65 maps |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.