9966279680 Delphi DCM3.4 map pack – Peugeot 308 2.0 136hp
SW
9966279680Injection System14Engine Torque10Rail9Air Control8Turbo System8Limiters1
This pack holds 50 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Peugeot 308 2.0 136hp · Delphi DCM3.4
More packs: Peugeot 308 · Delphi DCM3.4
All 50 maps
The percentage beside a name: the share of the 65 Delphi DCM3.4 packs that name it too.
Injection System 14 maps
- Injection timing - Main Injection Base Map 12 maps · 98%
- Injection timing - Main Injection Base Map 22 maps · 91%
- Fuel quantity injected f(RPM,Trq)4 maps · 55%
- Injection time55%
- Fuel quantity limiter5 maps · 2%
Engine Torque 10 maps
- Limiter of Maximum torque4 maps · 100%
- Torque during cranking f(RPM,ECT)97%
- Torque request during take off condition46%
- Torque request during take off condition - Reverse Gear40%
- Torque request during take off condition - First Gear2%
- Torque request during take off condition - Second Gear2%
- Torque request during take off condition - Third Gear2%
Rail 9 maps
- Rail pressure4 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)4 maps · 94%
- Rail pressure limiter f(RPM,Fuel_T)63%
Air Control 8 maps
- Air quantity - Base map5 maps · 97%
- EGR control - Opening percentage20%
- EGR control - Closing percentage2 maps · 2%
Turbo System 8 maps
- Turbo pressure4 maps · 100%
- Limiter of Turbo pressure97%
- Variable Geometry Duty Cycle3 maps · 45%
Limiters 1 map
- Idle engine speed f(ECT)86%
How this pack differs from other Delphi DCM3.4 packs
Named here, but by under half of the 65 Delphi DCM3.4 packs:
- EGR control - Closing percentage 2%
- Fuel quantity limiter 2%
- Torque request during take off condition - First Gear 2%
- Torque request during take off condition - Second Gear 2%
- Torque request during take off condition - Third Gear 2%
- EGR control - Opening percentage 20%
- Torque request during take off condition - Reverse Gear 40%
- Variable Geometry Duty Cycle 45%
- Torque request during take off condition 46%
Named by at least half of them, but not by this pack:
- Limiter of Maximum torque f(APS) 97%
- Injection timing - Main Injection Base Map 3 85%
- Limiter of Turbo pressure f(APS) 63%
- Variable geometry (VGT) or wastegate (WG) control 54%
- Optimal engine torque 52%
50 maps against the Delphi DCM3.4 median
The 65 Delphi DCM3.4 packs name 19 to 80 maps, median 53; 38% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 14 | 9 |
| Engine Torque | 10 | 14 |
| Rail | 9 | 7 |
| Air Control | 8 | 5 |
| Turbo System | 8 | 11 |
| Limiters | 1 | 1 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.