1037380697 Bosch EDC7UC31 map pack #6a66948214 – NEW Holland Truck CR 13.0 530hp
1037380697This pack holds 72 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
NEW Holland Truck CR 13.0 530hp · Bosch EDC7UC31
Also written: 1 037 380 697
More packs: NEW Holland Truck CR · Bosch EDC7UC31
All 72 maps
The percentage beside a name: the share of the 43 Bosch EDC7UC31 packs that name it too.
Engine Torque 28 maps
- Limiter of Maximum torque11 maps · 100%
- Torque during cranking f(RPM,ECT)84%
- Limiter of Maximum torque f(APS)77%
- Torque limiter at gearbox input8 maps · 44%
- Maximum torque for fifth gear35%
- Maximum torque for first gear35%
- Maximum torque for forth gear35%
- Maximum torque for second gear35%
- Maximum torque for third gear35%
- Maximum torque for sixth gear14%
- Torque request during take off condition12%
Injection System 22 maps
- Injection timing - Main Injection Base Map 15 maps · 100%
- Injection timing - Main Injection Base Map 286%
- Fuel quantity injected f(RPM,Trq)81%
- Smoke limitation - Lower Lambda value3 maps · 81%
- Fuel quantity limiter4 maps · 79%
- Injection base map3 maps · 70%
- Phase of injection5 maps · 26%
Turbo System 15 maps
- Turbo pressure6 maps · 86%
- Correction of turbo pressure f(IAT)63%
- Variable Geometry Duty Cycle6 maps · 51%
- Limiter of Turbo pressure2 maps · 42%
Air Control 6 maps
- EGR control - Opening percentage4 maps · 47%
- Gas quantity recirculation44%
- Air quantity - Base map40%
Limiters 1 map
- Idle engine speed f(ECT)58%
How this pack differs from other Bosch EDC7UC31 packs
Named here, but by under half of the 43 Bosch EDC7UC31 packs:
- Torque request during take off condition 12%
- Maximum torque for sixth gear 14%
- Phase of injection 26%
- Maximum torque for fifth gear 35%
- Maximum torque for first gear 35%
- Maximum torque for forth gear 35%
- Maximum torque for second gear 35%
- Maximum torque for third gear 35%
- Air quantity - Base map 40%
- Limiter of Turbo pressure 42%
- Gas quantity recirculation 44%
- Torque limiter at gearbox input 44%
- EGR control - Opening percentage 47%
Named by at least half of them, but not by this pack:
- Rail pressure 91%
- Rail pressure limiter f(RPM,Fuel_Q) 91%
- Rail pressure limiter f(RPM,Fuel_T) 74%
- Injection time 72%
- Torque request during standard condition 65%
- Injection timing - Main Injection Base Map 3 60%
- Injection timing - Main Injection Base Map 4 58%
- Injection timing - Main Injection Base Map 5 51%
72 maps against the Bosch EDC7UC31 median
The 43 Bosch EDC7UC31 packs name 18 to 78 maps, median 49; 72% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 28 | 14 |
| Injection System | 22 | 19 |
| Turbo System | 15 | 8 |
| Air Control | 6 | 1 |
| Limiters | 1 | 1 |
| Rail | 0 | 5 |
Same map list on 1 more listing of 1037380697
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| SW 1037380697 | NEW Holland Truck CR 13.0 530hp | 72 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.