−10%10% off all files right now — originals €18, map packs from €54.
€18 / file−10%

6429010400 6429021102 Bosch EDC17CP10 map pack – Mercedes ML 3.0 211hp

HW6429010400SW6429021102CAL6429037806
Turbo System20Injection System20Rail18Engine Torque13Limiters1

This pack holds 72 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.

Mercedes ML 3.0 211hp · Bosch EDC17CP10
Also written: A6429010400 · A 642 901 04 00 · A6429021102 · A 642 902 11 02 · A6429037806 · A 642 903 78 06

More packs: Mercedes ML · Bosch EDC17CP10

Where do I find these numbers?

All 72 maps

The percentage beside a name: the share of the 22 Bosch EDC17CP10 packs that name it too.

Turbo System 20 maps

  • Turbo pressure9 maps · 100%
  • Limiter of Turbo pressure f(IAT)77%
  • Variable geometry (VGT) or wastegate (WG) control8 maps · 68%
  • Limiter of differential Turbo pressure f(APS)2 maps · 9%

Injection System 20 maps

  • Fuel quantity limiter3 maps · 100%
  • Injection timing - Main Injection Base Map 24 maps · 100%
  • Injection timing - Main Injection Base Map 37 maps · 100%
  • Injection timing - Main Injection Base Map 195%
  • Fuel quantity injected f(RPM,Trq)73%
  • Injection time73%
  • Smoke limitation - Lower Lambda value3 maps · 73%

Rail 18 maps

  • Rail pressure3 maps · 100%
  • Rail pressure limiter f(RPM,Fuel_Q)2 maps · 100%
  • Rail pressure limiter f(RPM,Fuel_T)13 maps · 100%

Engine Torque 13 maps

  • Limiter of Maximum torque5 maps · 100%
  • Torque request during take off condition100%
  • Torque during cranking f(RPM,ECT)2 maps · 82%
  • Calculated engine torque2 maps · 64%
  • Optimal engine torque2 maps · 64%
  • Torque monitoring55%

Limiters 1 map

  • Idle engine speed f(ECT)82%

How this pack differs from other Bosch EDC17CP10 packs

Named here, but by under half of the 22 Bosch EDC17CP10 packs:

  • Limiter of differential Turbo pressure f(APS) 9%

Named by at least half of them, but not by this pack:

  • Limiter of Turbo pressure f(APS) 73%
  • Air quantity - Base map 68%
  • Injection timing - Main Injection Base Map 4 68%
  • Injection timing - Main Injection Base Map 5 68%
  • Limiter of Turbo pressure 68%
  • Variable Geometry Duty Cycle 68%
  • EGR control - Opening percentage 50%

72 maps against the Bosch EDC17CP10 median

The 22 Bosch EDC17CP10 packs name 33 to 96 maps, median 77.5; 36% of them name fewer than this one.

CategoryThis packMedian pack
Turbo System2020
Injection System2017.5
Rail1819
Engine Torque1313
Limiters11
Air Control04.5

Other SW versions on HW 6429010400

12 SW versions sit on this HW in the archive, 39 files in all: Mercedes G (11), Mercedes GL (10), Mercedes ML (7). The last column shows which have a map pack.

SWListed forMap pack
6429024800Mercedes ML 3.0 CDI 210hpnone listed
6429025501Mercedes ML 3.0 CDI 210hpnone listed
6429025701Mercedes ML 3.0 CDI 210hpnone listed
6429027900Mercedes ML 3.0 210hpnone listed
6429020701Mercedes GL 4.0 CDI 306hpnone listed
6429022901Mercedes G 3.0 184hpnone listed
6429023502Mercedes G 3.0 211hpnone listed
6429023600Mercedes E 3.0 231hpnone listed
6429026900Mercedes C 3.0 CDI 231hpnone listed
6429026901Mercedes C 3.0 CDI 231hpnone listed
6429029001Mercedes G 3.0 211hp OM642DE30LARnone listed

Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.

Original ECU file Bosch EDC17CP10 · 6429010400 · 6429021102
€18
  1. 1 · E-mail
  2. 2 · Card
  3. 3 · File

Checking availability…

All sales are final — no refunds.

Card payment by Stripe · charged only when ready · Terms of sale · Privacy