0261204900 1037350751 Bosch ME7.5 map pack – Audi S3 1.8 20V TURBO 210hp
0261204900SW1037350751CAL8N0_0003This pack holds 41 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi S3 1.8 20V TURBO 210hp · Bosch ME7.5
Also written: 0 261 204 900 · 1 037 350 751
More packs: Audi S3 · Bosch ME7.5
All 41 maps
The percentage beside a name: the share of the 137 Bosch ME7.5 packs that name it too.
Air Control 9 maps
- Requested engine load97%
- Throttle valve - operating angle97%
- Airflow mass through throttle valve93%
- Reference of maximum throttle valve angle86%
- Threshold of end limitation on throttle valve angle77%
- MAF scaling38%
- MAF sensor offset32%
- MAP sensor offset15%
- Throttle valve11%
Injection System 9 maps
- Requested Lambda96%
- Phase of injection2 maps · 74%
- Lambda for component protection73%
- Injection correction61%
- Injection base map2 maps · 37%
- Injection correction f(ECT)18%
- Conversion of relative fuel mass into effective injection time15%
Turbo System 9 maps
- Slow incremental factor of turbo pressure84%
- Fast reduction factor of turbo pressure81%
- Limiter of Turbo pressure2 maps · 80%
- Correction of slow incremental factor of turbo pressure2 maps · 72%
- Limiter of steady turbo pressure53%
- Limiter of impulsive turbo pressure50%
- Limiter of Turbo pressure f(APS)4%
Spark Advance 5 maps
- Spark Advance base map2 maps · 98%
- Minimum Spark Advance38%
- Optimal Spark Advance 12 maps · 6%
Limiters 4 maps
- RPM Limiter2 maps · 96%
- RPM limiter (higher threshold)74%
- Maximum speed of vehicle68%
Engine Torque 3 maps
- Optimal engine torque98%
- Torque request during take off condition84%
- Torque request during take off condition - Reverse Gear26%
Deactivations 2 maps
- Lambda Sensor (1=ON, 0=OFF)2 maps · 80%
How this pack differs from other Bosch ME7.5 packs
Named here, but by under half of the 137 Bosch ME7.5 packs:
- Limiter of Turbo pressure f(APS) 4%
- Optimal Spark Advance 1 6%
- Throttle valve 11%
- Conversion of relative fuel mass into effective injection time 15%
- MAP sensor offset 15%
- Injection correction f(ECT) 18%
- Torque request during take off condition - Reverse Gear 26%
- MAF sensor offset 32%
- Injection base map 37%
- MAF scaling 38%
- Minimum Spark Advance 38%
Named by at least half of them, but not by this pack:
- Throttle valve f(Accelerator pedal) 72%
- Injection at partial load 66%
- Optimal Spark Advance 66%
- Spark advance during cranking 62%
- Wastegate Duty Cycle 62%
- Exhaust gas temperature 60%
- Linearization of impulsive turbo pressure 59%
41 maps against the Bosch ME7.5 median
The 137 Bosch ME7.5 packs name 12 to 108 maps, median 49; 26% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Air Control | 9 | 8 |
| Injection System | 9 | 6 |
| Turbo System | 9 | 11 |
| Spark Advance | 5 | 5 |
| Limiters | 4 | 8 |
| Engine Torque | 3 | 4 |
| Deactivations | 2 | 4 |
Other SW versions on HW 0261204900
2 SW versions sit on this HW in the archive, 2 files in all. The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 1037352771 | Audi S3 1.8 20V TURBO 210hp | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.