00001242033101 000010CA3B5A01 Bosch MEVD17.2.8 map pack – BMW M Series 4.4 560hp
00001242033101SW000010CA3B5A01CAL00001242033101_000010CA3B5A01_000010CC3B5AF2UPG000010CC3B5AF2This pack holds 246 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW M Series 4.4 560hp · Bosch MEVD17.2.8
More packs: BMW M Series · Bosch MEVD17.2.8
All 246 maps
The percentage beside a name: the share of the 11 Bosch MEVD17.2.8 packs that name it too.
Engine Torque 55 maps
- Limiter of Maximum torque12 maps · 100%
- Optimal engine torque2 maps · 100%
- Torque request during standard condition6 maps · 82%
- Engine torque correction73%
- Maximum engine torque correction f(ECT_T)73%
- Torque monitoring17 maps · 73%
- Torque limiter for clutch protection3 maps · 55%
- Torque limiter for vehicle speed55%
- Calculated engine torque12 maps · 45%
Spark Advance 45 maps
- Optimal Spark Advance4 maps · 100%
- Spark Advance base map11 maps · 100%
- Spark Advance at full load3 maps · 73%
- Spark advance correction f(Air_T)2 maps · 73%
- Limiter of knocking sensor8 maps · 55%
- Spark advance correction factor f(ECT)2 maps · 55%
- Minimum Spark Advance15 maps · 27%
Limiters 34 maps
- Maximum speed of vehicle8 maps · 100%
- RPM Limiter2 maps · 100%
- RPM limiter (higher threshold)23 maps · 100%
- Upper speed threshold for leak detection55%
Variable Valve Timing (VVT) 32 maps
- Exhaust - Catalyst protection6 maps · 100%
- Exhaust - High speed3 maps · 100%
- Exhaust - Low speed2 maps · 100%
- Intake10 maps · 100%
- Intake - Catalyst protection6 maps · 100%
- Intake - High speed3 maps · 100%
- Intake - Low speed2 maps · 100%
Turbo System 27 maps
- Wastegate Duty Cycle8 maps · 100%
- Limiter of Turbo pressure9 maps · 82%
- Limiter of Turbo pressure f(IAT)73%
- Turbine efficiency2 maps · 73%
- Correction of turbo pressure2 maps · 55%
- Limiter of differential Turbo pressure f(APS)4 maps · 55%
- Lower limit for leakage determination55%
Air Control 21 maps
- Airflow mass through throttle valve100%
- Engine load limiter6 maps · 82%
- Exhaust gas temperature4 maps · 73%
- MAF sensor slope3 maps · 73%
- EGT sensor scaling55%
- MAP sensor slope55%
- Maximum MAF sensor2 maps · 55%
- Minimum MAF sensor2 maps · 55%
- Reference of maximum throttle valve angle55%
Deactivations 20 maps
- Speed limiters (switch)73%
- Lambda Sensor (1=ON, 0=OFF)19 maps · 55%
Injection System 8 maps
- Injection base map3 maps · 82%
- Injection correction3 maps · 73%
- Injection at full load55%
- Injection enrichment55%
Rail 4 maps
- Rail pressure3 maps · 73%
- Rail pressure limiter f(RPM,Fuel_Q)73%
How this pack differs from other Bosch MEVD17.2.8 packs
Named here, but by under half of the 11 Bosch MEVD17.2.8 packs:
- Minimum Spark Advance 27%
- Calculated engine torque 45%
246 maps against the Bosch MEVD17.2.8 median
The 11 Bosch MEVD17.2.8 packs name 63 to 249 maps, median 210; 82% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 55 | 43 |
| Spark Advance | 45 | 28 |
| Limiters | 34 | 30 |
| Variable Valve Timing (VVT) | 32 | 32 |
| Turbo System | 27 | 23 |
| Air Control | 21 | 21 |
| Deactivations | 20 | 20 |
| Injection System | 8 | 8 |
| Rail | 4 | 3 |
Other SW versions on HW 00001242033101
7 SW versions sit on this HW in the archive, 26 files in all: BMW M Series (25), BMW 6 Series (1). The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 000010CA313201 | BMW M Series 4.4 560hp S63B44B | 63 maps |
| 000010CA3B5001 | BMW M Series 4.4 560hp | 210 maps |
| 000010CA3B7801 | BMW M Series 4.4 560hp | none listed |
| 000010CA3B8201 | BMW M Series 4.4 560hp S63B44B | none listed |
| 000010CA3B8C01 | BMW M Series 4.4 560hp S63B44B | none listed |
| 000010C83B8201 | BMW 6 Series 4.4 450hp S63B44B | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.