8U0906259_0005 Siemens SIMOS 18.1 map pack – Audi Q3 2.0 180hp
8U0906259_0005This pack holds 343 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi Q3 2.0 180hp · Siemens SIMOS 18.1
More packs: Audi Q3 · Siemens SIMOS 18.1
All 343 maps
The percentage beside a name: the share of the 48 Siemens SIMOS 18.1 packs that name it too.
Engine Torque 118 maps
- Calculated engine torque100%
- Limiter of Maximum torque12 maps · 100%
- Optimal engine torque25 maps · 100%
- Torque limiter for clutch protection7 maps · 100%
- Torque request during standard condition23 maps · 96%
- Engine torque correction5 maps · 75%
- Maximum engine torque correction f(ECT_T)10 maps · 60%
- Maximum engine torque correction f(IAT_T)5 maps · 58%
- Maximum torque limiter f(gear)30 maps · 46%
Spark Advance 116 maps
- Optimal Spark Advance37 maps · 100%
- Spark Advance base map38 maps · 100%
- Minimum Spark Advance32 maps · 85%
- Limiter of knocking sensor8 maps · 81%
- Spark advance correction f(Air_T)62%
Air Control 39 maps
- Reference of maximum throttle valve angle100%
- Requested engine load24 maps · 100%
- Throttle valve98%
- Exhaust gas temperature4 maps · 96%
- Engine load limiter4 maps · 92%
- Threshold of end limitation on throttle valve angle2 maps · 81%
- Airflow mass through throttle valve77%
- Minimum MAF sensor75%
- Maximum MAF sensor69%
Limiters 25 maps
- Maximum speed of vehicle6 maps · 100%
- RPM Limiter5 maps · 100%
- RPM limiter (higher threshold)14 maps · 92%
Turbo System 20 maps
- Limiter of Turbo pressure7 maps · 100%
- Linearization of impulsive turbo pressure2 maps · 100%
- Wastegate Duty Cycle4 maps · 100%
- Limiter of impulsive turbo pressure96%
- Correction of impulsive turbo pressure f(IAT)90%
- Maximum turbocharger speed2 maps · 58%
- Turbo pressure58%
- Temperature difference to activate turbine overheating protection54%
- Turbine efficiency4%
Rail 13 maps
- Rail pressure13 maps · 100%
Injection System 9 maps
- Injection at full load2 maps · 100%
- Injection base map2 maps · 100%
- Requested Lambda3 maps · 100%
- Limiter of Lambda B79%
- Limiter of Lambda A75%
Deactivations 3 maps
- Lambda Sensor (1=ON, 0=OFF)3 maps · 73%
How this pack differs from other Siemens SIMOS 18.1 packs
Named here, but by under half of the 48 Siemens SIMOS 18.1 packs:
- Turbine efficiency 4%
- Maximum torque limiter f(gear) 46%
Named by at least half of them, but not by this pack (14 of 16, the commonest first):
- RPM limiter (lower threshold) 77%
- Deactivation turbocharger protection (1=ON, 0=OFF) 75%
- MAP sensor maximum voltage 75%
- Manual Setpoint MAP 75%
- Threshold for turbocharger speed reduction 75%
- Boost pressure deviation for basic charge air pressure too low 71%
- Maximum allowable exhaust gas temperature for spark retard control 71%
- Minimum pressure difference for basic charge air pressure too low 71%
- RPM limiter in Neutral 71%
- Cylinder head temperature 69%
- Maximum turbocharger temperature 69%
- Minimum pressure difference for basic charge air pressure too high 69%
- Maximum MAP sensor 62%
- Torque request during take off condition 62%
343 maps against the Siemens SIMOS 18.1 median
The 48 Siemens SIMOS 18.1 packs name 256 to 467 maps, median 366; 25% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 118 | 119.5 |
| Spark Advance | 116 | 116 |
| Air Control | 39 | 47 |
| Limiters | 25 | 26.5 |
| Turbo System | 20 | 26 |
| Rail | 13 | 13 |
| Injection System | 9 | 10 |
| Deactivations | 3 | 4 |
Same map list as 1 other SW version
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| Calibration 8U0906259_0007 | Audi Q3 2.0 180hp | 343 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.