08587807 08512346 Bosch EDC17CP09 map pack – BMW 3 Series 3.0 286hp
08587807SW08512346CAL08587807_O_77TNKK980AUPGO_77TNKK980AThis pack holds 65 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW 3 Series 3.0 286hp · Bosch EDC17CP09
More packs: BMW 3 Series · Bosch EDC17CP09
All 65 maps
The percentage beside a name: the share of the 49 Bosch EDC17CP09 packs that name it too.
Turbo System 29 maps
- Limiter of Turbo pressure f(APS)2 maps · 100%
- Turbo pressure6 maps · 100%
- Variable geometry (VGT) or wastegate (WG) control14 maps · 53%
- Limiter of Turbo pressure7 maps · 47%
Engine Torque 19 maps
- Limiter of Maximum torque9 maps · 100%
- Torque during cranking f(RPM,ECT)100%
- Torque request during standard condition100%
- Torque request during take off condition100%
- Maximum torque for fifth gear71%
- Maximum torque for first gear71%
- Maximum torque for forth gear71%
- Maximum torque for second gear71%
- Maximum torque for third gear71%
- Maximum torque for sixth gear69%
- Maximum torque for reverse gear67%
Rail 8 maps
- Rail pressure6 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)94%
- Rail pressure limiter f(RPM,Fuel_T)84%
Injection System 6 maps
- Fuel quantity injected f(RPM,Trq)100%
- Injection timing - Main Injection Base Map 1100%
- Smoke limitation - Lower Lambda value100%
- Injection time94%
- Injection timing - Main Injection Base Map 290%
- Injection timing - Main Injection Base Map 388%
Air Control 2 maps
- Percentage valve opening33%
- Gas quantity recirculation31%
Limiters 1 map
- Maximum speed of vehicle100%
How this pack differs from other Bosch EDC17CP09 packs
Named here, but by under half of the 49 Bosch EDC17CP09 packs:
- Gas quantity recirculation 31%
- Percentage valve opening 33%
- Limiter of Turbo pressure 47%
Named by at least half of them, but not by this pack:
- Torque limiter for vehicle speed 96%
- Calculated engine torque 88%
- EGR Valve 55%
- Engine torque correction 53%
- Exhaust gas temperature 53%
- Idle engine speed f(ECT) 53%
- Maximum engine torque correction f(eng_T) 53%
- Maximum torque limiter f(fuel_T) 53%
- Torque limiter at gearbox input 53%
- Variable Geometry Duty Cycle 53%
65 maps against the Bosch EDC17CP09 median
The 49 Bosch EDC17CP09 packs name 21 to 144 maps, median 125; 8% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Turbo System | 29 | 29 |
| Engine Torque | 19 | 29 |
| Rail | 8 | 12 |
| Injection System | 6 | 30 |
| Air Control | 2 | 2 |
| Limiters | 1 | 3 |
| Deactivations | 0 | 12 |
Other SW versions on HW 08587807
6 SW versions sit on this HW in the archive, 7 files in all: BMW X Series (4), BMW 3 Series (3). The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 08510204 | BMW 3 Series 3.0 286hp | none listed |
| 08516231 | BMW 3 Series 3.0 286hp | none listed |
| 08508709 | BMW X Series 3.0 D 235hp | 110 maps |
| 08513110 | BMW X Series 3.0 D 286hp | none listed |
| 08588670 | BMW X Series 3.0 D 286hp M57N2 | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.