4H0907401Q_0002 Bosch EDC17CP44 map pack – Audi A8 3.0 TDI 250hp
CAL
4H0907401Q_0002Turbo System40Injection System27Engine Torque21Rail16
This pack holds 104 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A8 3.0 TDI 250hp · Bosch EDC17CP44
More packs: Audi A8 · Bosch EDC17CP44
All 104 maps
The percentage beside a name: the share of the 206 Bosch EDC17CP44 packs that name it too.
Turbo System 40 maps
- Turbo pressure19 maps · 100%
- Limiter of Turbo pressure f(APS)2 maps · 99%
- Variable geometry (VGT) or wastegate (WG) control19 maps · 33%
Injection System 27 maps
- Fuel quantity injected f(RPM,Trq)7 maps · 100%
- Injection timing - Main Injection Base Map 14 maps · 100%
- Injection timing - Main Injection Base Map 23 maps · 97%
- Injection timing - Main Injection Base Map 32 maps · 68%
- Injection timing - Main Injection Base Map 43 maps · 50%
- Injection timing - Main Injection Base Map 54 maps · 25%
- Phase of injection4 maps · 3%
Engine Torque 21 maps
- Limiter of Maximum torque f(APS)6 maps · 100%
- Maximum torque for fifth gear100%
- Maximum torque for first gear100%
- Maximum torque for forth gear100%
- Maximum torque for second gear100%
- Maximum torque for sixth gear100%
- Maximum torque for third gear99%
- Torque request during standard condition4 maps · 99%
- Torque during cranking f(RPM,ECT)96%
- Maximum torque for seventh gear95%
- Maximum torque for reverse gear94%
- Torque limiter at gearbox input26%
- Torque limiter for clutch protection12%
Rail 16 maps
- Rail pressure11 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)100%
- Rail pressure limiter f(RPM,Fuel_T)4 maps · 51%
How this pack differs from other Bosch EDC17CP44 packs
Named here, but by under half of the 206 Bosch EDC17CP44 packs:
- Phase of injection 3%
- Torque limiter for clutch protection 12%
- Injection timing - Main Injection Base Map 5 25%
- Torque limiter at gearbox input 26%
- Variable geometry (VGT) or wastegate (WG) control 33%
- Injection timing - Main Injection Base Map 4 50%
Named by at least half of them, but not by this pack:
- Injection time 97%
- Limiter of Maximum torque 95%
- Injection correction 91%
- Torque request during take off condition 68%
- Maximum speed of vehicle 63%
- Variable Geometry Duty Cycle 61%
- Smoke limitation - Lower Lambda value 60%
- Exhaust gas temperature 55%
- Injection correction f(ECT) 50%
104 maps against the Bosch EDC17CP44 median
The 206 Bosch EDC17CP44 packs name 51 to 392 maps, median 139; 16% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Turbo System | 40 | 15 |
| Injection System | 27 | 53 |
| Engine Torque | 21 | 29 |
| Rail | 16 | 12 |
| Air Control | 0 | 6.5 |
| Limiters | 0 | 3 |
| Deactivations | 0 | 2 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.