1037505819 Bosch EDC16CP31 map pack – Mercedes Sprinter 3.0 184hp
1037505819This pack holds 49 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Mercedes Sprinter 3.0 184hp · Bosch EDC16CP31
Also written: A1037505819 · A 103 750 58 19 · 1 037 505 819
More packs: Mercedes Sprinter · Bosch EDC16CP31
All 49 maps
The percentage beside a name: the share of the 238 Bosch EDC16CP31 packs that name it too.
Injection System 14 maps
- Fuel quantity injected f(RPM,Trq)100%
- Injection time99%
- Injection timing - Main Injection Base Map 199%
- Injection timing - Main Injection Base Map 297%
- Injection timing - Main Injection Base Map 394%
- Fuel quantity limiter4 maps · 91%
- Injection timing - Main Injection Base Map 440%
- Injection timing - Main Injection Base Map 540%
- Smoke limitation - Lower Lambda value3 maps · 39%
Engine Torque 13 maps
- Maximum torque for first gear100%
- Torque during cranking f(RPM,ECT)100%
- Torque request during standard condition2 maps · 100%
- Maximum torque for fifth gear99%
- Maximum torque for forth gear99%
- Maximum torque for reverse gear99%
- Maximum torque for second gear99%
- Maximum torque for sixth gear99%
- Maximum torque for third gear99%
- Torque limiter at gearbox input87%
- Maximum torque for seventh gear76%
- Limiter of Maximum torque42%
Limiters 9 maps
- Maximum speed of vehicle8 maps · 52%
- Maximum speed of vehicle A6%
Rail 7 maps
- Rail pressure2 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)4 maps · 97%
- Rail pressure limiter f(RPM,Fuel_T)95%
Turbo System 6 maps
- Turbo pressure4 maps · 100%
- Limiter of Turbo pressure f(IAT)28%
- Variable Geometry Duty Cycle2%
How this pack differs from other Bosch EDC16CP31 packs
Named here, but by under half of the 238 Bosch EDC16CP31 packs:
- Variable Geometry Duty Cycle 2%
- Maximum speed of vehicle A 6%
- Limiter of Turbo pressure f(IAT) 28%
- Smoke limitation - Lower Lambda value 39%
- Injection timing - Main Injection Base Map 4 40%
- Injection timing - Main Injection Base Map 5 40%
- Limiter of Maximum torque 42%
Named by at least half of them, but not by this pack:
- Variable geometry (VGT) or wastegate (WG) control 89%
- Limiter of Turbo pressure f(APS) 74%
- EGR control - Closing percentage 51%
49 maps against the Bosch EDC16CP31 median
The 238 Bosch EDC16CP31 packs name 22 to 76 maps, median 43; 58% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 14 | 13 |
| Engine Torque | 13 | 12 |
| Limiters | 9 | 1 |
| Rail | 7 | 5 |
| Turbo System | 6 | 7 |
| Air Control | 0 | 2 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.