07794904 1037361820 Bosch EDC16C1 map pack – BMW 7 Series 3.0 D 218hp
07794904SW1037361820CALAQ91BEP300This pack holds 42 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW 7 Series 3.0 D 218hp · Bosch EDC16C1
Also written: 1 037 361 820
More packs: BMW 7 Series · Bosch EDC16C1
All 42 maps
The percentage beside a name: the share of the 92 Bosch EDC16C1 packs that name it too.
Engine Torque 16 maps
- Limiter of Maximum torque4 maps · 100%
- Torque during cranking f(RPM,ECT)100%
- Torque request during standard condition100%
- Maximum torque for fifth gear2 maps · 99%
- Maximum torque for first gear99%
- Maximum torque for forth gear99%
- Maximum torque for second gear99%
- Maximum torque for sixth gear2 maps · 99%
- Maximum torque for third gear99%
- Maximum torque for reverse gear97%
- Torque request during take off condition29%
Injection System 12 maps
- Fuel quantity injected f(RPM,Trq)3 maps · 100%
- Smoke limitation - Lower Lambda value2 maps · 100%
- Injection timing - Main Injection Base Map 12 maps · 98%
- Injection timing - Main Injection Base Map 32 maps · 84%
- Injection timing - Main Injection Base Map 22 maps · 62%
- Phase of injection13%
Turbo System 7 maps
- Limiter of Turbo pressure f(APS)100%
- Turbo pressure100%
- Limiter of Turbo pressure2 maps · 98%
- Variable geometry (VGT) or wastegate (WG) control3 maps · 10%
Rail 5 maps
- Rail pressure2 maps · 100%
- Rail pressure limiter f(RPM,Fuel_T)2 maps · 75%
- Rail pressure limiter f(RPM,Fuel_Q)48%
Air Control 1 map
- Gas quantity recirculation13%
Limiters 1 map
- Maximum speed of vehicle78%
How this pack differs from other Bosch EDC16C1 packs
Named here, but by under half of the 92 Bosch EDC16C1 packs:
- Variable geometry (VGT) or wastegate (WG) control 10%
- Gas quantity recirculation 13%
- Phase of injection 13%
- Torque request during take off condition 29%
- Rail pressure limiter f(RPM,Fuel_Q) 48%
Named by at least half of them, but not by this pack:
- Variable Geometry Duty Cycle 95%
- Injection time 87%
- Air quantity - Base map 80%
- Fuel quantity limiter 70%
- Idle engine speed f(ECT) 68%
- Maximum engine torque correction f(ECT_T) 60%
- Rail pressure limiter 60%
- EGR Valve 53%
42 maps against the Bosch EDC16C1 median
The 92 Bosch EDC16C1 packs name 39 to 97 maps, median 64; 3% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 16 | 20 |
| Injection System | 12 | 16 |
| Turbo System | 7 | 10 |
| Rail | 5 | 9.5 |
| Air Control | 1 | 1 |
| Limiters | 1 | 2 |
| Deactivations | 0 | 2 |
Same map list as 1 other SW version
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| SW 1037390907 | BMW 7 Series 3.0 D 218hp | 42 |
Other SW versions on HW 07794904
5 SW versions sit on this HW in the archive, 9 files in all. The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 1037361838 | BMW 7 Series 3.0 D 218hp | none listed |
| 1037361843 | BMW 7 Series 3.0 D 218hp | none listed |
| 1037361849 | BMW 7 Series 3.0 D 218hp M57TUB30 | none listed |
| 1037361884 | BMW 7 Series 3.0 218hp M57TUD30 | 59 maps |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.