8P0907115A 8P0907115A_0010 Bosch MED9.1 map pack 156 maps – Audi S3 2.0 256hp
8P0907115ASW0010CAL8P0907115A_0010This pack holds 156 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi S3 2.0 256hp · Bosch MED9.1
Also written: 8P0 907 115 A · 8P0-907-115-A
More packs: Audi S3 · Bosch MED9.1
All 156 maps
The percentage beside a name: the share of the 152 Bosch MED9.1 packs that name it too.
Engine Torque 33 maps
- Optimal engine torque2 maps · 100%
- Desired torque at wheel75%
- Calculated engine torque7 maps · 69%
- Limiter of Maximum torque56%
- Torque request during take off condition - Fifth Gear53%
- Torque request during take off condition - First Gear53%
- Torque request during take off condition - Forth Gear53%
- Torque request during take off condition - Second Gear53%
- Torque request during take off condition - Third Gear53%
- Torque request during take off condition - Reverse Gear51%
- Torque monitoring14 maps · 49%
- Torque limiter for clutch protection46%
- Engine torque correction40%
Turbo System 32 maps
- Limiter of Turbo pressure6 maps · 79%
- Turbo pressure2 maps · 79%
- Limiter of impulsive turbo pressure3 maps · 75%
- Correction of turbo pressure f(IAT)4 maps · 72%
- Slow incremental factor of turbo pressure72%
- Correction of slow incremental factor of turbo pressure71%
- Fast reduction factor of turbo pressure71%
- Limiter of steady turbo pressure3 maps · 68%
- Correction of impulsive turbo pressure f(IAT)3 maps · 65%
- Linearization of impulsive turbo pressure56%
- Limiter of Turbo pressure f(APS)53%
- Correction of steady turbo pressure f(IAT)3 maps · 47%
- Limiter of Turbo pressure f(IAT)43%
- Correction of turbo pressure2 maps · 36%
Spark Advance 27 maps
- Spark Advance base map6 maps · 99%
- Spark advance during cranking86%
- Optimal Spark Advance2 maps · 50%
- Limiter of knocking sensor4 maps · 41%
- Minimum Spark Advance12 maps · 41%
- Spark advance correction f(Trq)2 maps · 41%
Injection System 17 maps
- Requested Lambda3 maps · 99%
- Injection base map74%
- Injection correction6 maps · 65%
- Injection enrichment61%
- Limiter of Lambda A3 maps · 47%
- Limiter of Lambda B3 maps · 41%
Limiters 15 maps
- RPM Limiter4 maps · 99%
- RPM limiter (higher threshold)2 maps · 97%
- Maximum speed of vehicle9 maps · 91%
Air Control 13 maps
- Requested engine load99%
- Airflow mass through throttle valve2 maps · 95%
- Threshold of end limitation on throttle valve angle95%
- Throttle valve - operating angle95%
- Throttle valve f(Accelerator pedal)85%
- Exhaust gas temperature3 maps · 64%
- Engine load limiter4 maps · 56%
Variable Valve Timing (VVT) 10 maps
- Intake10 maps · 41%
Rail 7 maps
- Rail pressure5 maps · 67%
- Rail pressure limiter f(RPM,Fuel_Q)51%
- Rail pressure limiter f(RPM,Fuel_T)38%
Deactivations 2 maps
- Lambda Sensor (1=ON, 0=OFF)66%
- Catalytic converter Diagnosis (1=ON, 0=OFF)62%
How this pack differs from other Bosch MED9.1 packs
Named here, but by under half of the 152 Bosch MED9.1 packs:
- Correction of turbo pressure 36%
- Rail pressure limiter f(RPM,Fuel_T) 38%
- Engine torque correction 40%
- Intake 41%
- Limiter of Lambda B 41%
- Limiter of knocking sensor 41%
- Minimum Spark Advance 41%
- Spark advance correction f(Trq) 41%
- Limiter of Turbo pressure f(IAT) 43%
- Torque limiter for clutch protection 46%
- Limiter of Lambda A 47%
- Correction of steady turbo pressure f(IAT) 47%
- Torque monitoring 49%
Named by at least half of them, but not by this pack:
- Lambda for component protection 53%
156 maps against the Bosch MED9.1 median
The 152 Bosch MED9.1 packs name 27 to 213 maps, median 94.5; 66% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 33 | 15 |
| Turbo System | 32 | 20 |
| Spark Advance | 27 | 22 |
| Injection System | 17 | 11 |
| Limiters | 15 | 17 |
| Air Control | 13 | 9 |
| Variable Valve Timing (VVT) | 10 | 0 |
| Rail | 7 | 6 |
| Deactivations | 2 | 2 |
Same map list as 1 other SW version
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| SW 1037501227 | Audi S3 2.0 265hp | 161 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.