0261S04656 1037399152 Bosch ME7.5 map pack – Seat Exeo 1.8 20V 163hp
0261S04656SW1037399152CAL3R0906032_0003This pack holds 52 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Seat Exeo 1.8 20V 163hp · Bosch ME7.5
Also written: 1 037 399 152
More packs: Seat Exeo · Bosch ME7.5
All 52 maps
The percentage beside a name: the share of the 137 Bosch ME7.5 packs that name it too.
Turbo System 12 maps
- Slow incremental factor of turbo pressure84%
- Fast reduction factor of turbo pressure81%
- Correction of slow incremental factor of turbo pressure72%
- Wastegate Duty Cycle2 maps · 62%
- Linearization of impulsive turbo pressure59%
- Limiter of steady turbo pressure53%
- Limiter of impulsive turbo pressure50%
- Correction of turbo pressure f(IAT)39%
- Limiter of Turbo pressure f(IAT)21%
- Correction of steady turbo pressure f(IAT)5%
- Correction of impulsive turbo pressure f(IAT)4%
Limiters 9 maps
- RPM Limiter5 maps · 96%
- RPM limiter (higher threshold)74%
- Maximum speed of vehicle3 maps · 68%
Air Control 8 maps
- Requested engine load97%
- Throttle valve - operating angle97%
- Airflow mass through throttle valve93%
- Reference of maximum throttle valve angle86%
- Threshold of end limitation on throttle valve angle77%
- Throttle valve f(Accelerator pedal)72%
- Exhaust gas temperature2 maps · 60%
Engine Torque 7 maps
- Optimal engine torque98%
- Torque request during standard condition2 maps · 20%
- Torque request - Low speed2 maps · 13%
- Torque request - High speed7%
- Maximum torque for reverse gear3%
Injection System 6 maps
- Requested Lambda96%
- Phase of injection2 maps · 74%
- Lambda for component protection73%
- Injection at partial load66%
- Injection correction61%
Spark Advance 5 maps
- Spark Advance base map2 maps · 98%
- Optimal Spark Advance2 maps · 66%
- Spark advance during cranking62%
Deactivations 5 maps
- Lambda Sensor (1=ON, 0=OFF)4 maps · 80%
- Catalytic converter Diagnosis (1=ON, 0=OFF)35%
How this pack differs from other Bosch ME7.5 packs
Named here, but by under half of the 137 Bosch ME7.5 packs:
- Maximum torque for reverse gear 3%
- Correction of impulsive turbo pressure f(IAT) 4%
- Correction of steady turbo pressure f(IAT) 5%
- Torque request - High speed 7%
- Torque request - Low speed 13%
- Torque request during standard condition 20%
- Limiter of Turbo pressure f(IAT) 21%
- Catalytic converter Diagnosis (1=ON, 0=OFF) 35%
- Correction of turbo pressure f(IAT) 39%
Named by at least half of them, but not by this pack:
- Torque request during take off condition 84%
- Limiter of Turbo pressure 80%
52 maps against the Bosch ME7.5 median
The 137 Bosch ME7.5 packs name 12 to 108 maps, median 49; 53% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Turbo System | 12 | 11 |
| Limiters | 9 | 8 |
| Air Control | 8 | 8 |
| Engine Torque | 7 | 4 |
| Injection System | 6 | 6 |
| Spark Advance | 5 | 5 |
| Deactivations | 5 | 4 |
Same map list as 2 other SW versions
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| SW 1037372505 | Audi A4 1.8 20V 163hp | 52 |
| SW 1037372534 | Audi A4 1.8 20V TURBO 150hp | 52 |
Other SW versions on HW 0261S04656
2 SW versions sit on this HW in the archive, 2 files in all. The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 1037500825 | Seat Exeo 1.8 20V TURBO 150hp | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.