Bosch MEVD17.2.G map pack – BMW 2 Series 3.0 326hp
Engine Torque51Variable Valve Timing (VVT)32Limiters30Turbo System28Air Control24Spark Advance22Deactivations18Injection System12Rail5
This pack holds 222 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW 2 Series 3.0 326hp · Bosch MEVD17.2.G
More packs: BMW 2 Series · Bosch MEVD17.2.G
All 222 maps
The percentage beside a name: the share of the 47 Bosch MEVD17.2.G packs that name it too.
Engine Torque 51 maps
- Limiter of Maximum torque9 maps · 100%
- Optimal engine torque2 maps · 100%
- Engine torque correction91%
- Torque monitoring21 maps · 91%
- Torque request during standard condition9 maps · 89%
- Maximum engine torque correction f(ECT_T)79%
- Torque limiter at gearbox input2 maps · 70%
- Torque limiter for clutch protection5 maps · 70%
- Torque limiter for vehicle speed57%
Variable Valve Timing (VVT) 32 maps
- Exhaust - Catalyst protection9 maps · 100%
- Exhaust - High speed3 maps · 100%
- Exhaust - Low speed2 maps · 100%
- Intake10 maps · 100%
- Intake - Catalyst protection3 maps · 100%
- Intake - High speed3 maps · 100%
- Intake - Low speed2 maps · 98%
Limiters 30 maps
- Maximum speed of vehicle5 maps · 100%
- RPM Limiter7 maps · 100%
- RPM limiter (higher threshold)17 maps · 100%
- Upper speed threshold for leak detection62%
Turbo System 28 maps
- Limiter of Turbo pressure10 maps · 100%
- Wastegate Duty Cycle7 maps · 100%
- Limiter of differential Turbo pressure f(APS)4 maps · 91%
- Turbine efficiency2 maps · 91%
- Overboost duration2 maps · 74%
- Correction of turbo pressure2 maps · 62%
- Lower limit for leakage determination62%
Air Control 24 maps
- Airflow mass through throttle valve100%
- Engine load limiter6 maps · 91%
- Exhaust gas temperature6 maps · 91%
- MAF sensor slope3 maps · 91%
- Reference of maximum throttle valve angle74%
- Volumetric efficiency72%
- MAP sensor slope68%
- EGT sensor scaling60%
- Maximum MAF sensor2 maps · 60%
- Minimum MAF sensor2 maps · 60%
Spark Advance 22 maps
- Spark advance at low load2 maps · 85%
- Spark advance correction f(Air_T)3 maps · 85%
- Spark Advance at full load83%
- Optimal Spark Advance5 maps · 81%
- Spark Advance base map4 maps · 70%
- Spark advance correction factor f(ECT)68%
- Limiter of knocking sensor6 maps · 60%
Deactivations 18 maps
- Lambda Sensor (1=ON, 0=OFF)18 maps · 87%
Injection System 12 maps
- Injection base map2 maps · 100%
- Injection correction2 maps · 91%
- Injection enrichment85%
- Lambda for component protection4 maps · 85%
- Injection at full load3 maps · 77%
Rail 5 maps
- Rail pressure limiter f(RPM,Fuel_Q)91%
- Rail pressure2 maps · 89%
- Maximum rail pressure setpoint for engine start60%
- Minimum pressure for start of injection60%
How this pack differs from other Bosch MEVD17.2.G packs
Every name here is in at least half of the 47 Bosch MEVD17.2.G packs, and no name that half of them share is missing.
222 maps against the Bosch MEVD17.2.G median
The 47 Bosch MEVD17.2.G packs name 76 to 257 maps, median 208; 64% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 51 | 48 |
| Variable Valve Timing (VVT) | 32 | 32 |
| Limiters | 30 | 30 |
| Turbo System | 28 | 27 |
| Air Control | 24 | 23 |
| Spark Advance | 22 | 18 |
| Deactivations | 18 | 19 |
| Injection System | 12 | 11 |
| Rail | 5 | 5 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.