8S0906259_0003 Siemens SIMOS 18.1 map pack – Audi TT 2.0 230hp
8S0906259_0003This pack holds 276 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi TT 2.0 230hp · Siemens SIMOS 18.1
More packs: Audi TT · Siemens SIMOS 18.1
All 276 maps
The percentage beside a name: the share of the 48 Siemens SIMOS 18.1 packs that name it too.
Engine Torque 112 maps
- Calculated engine torque100%
- Limiter of Maximum torque69 maps · 100%
- Optimal engine torque24 maps · 100%
- Torque limiter for clutch protection2 maps · 100%
- Torque request during standard condition3 maps · 96%
- Torque request during take off condition2 maps · 62%
- Torque request during take off condition - Automatic Transmission3 maps · 44%
- Torque request - High speed2 maps · 12%
- Torque request - Low speed5 maps · 12%
- Torque request during take off condition - Reverse Gear8%
Spark Advance 75 maps
- Optimal Spark Advance38 maps · 100%
- Spark Advance base map37 maps · 100%
Air Control 27 maps
- Reference of maximum throttle valve angle100%
- Requested engine load24 maps · 100%
- Throttle valve98%
- Exhaust gas temperature96%
Limiters 22 maps
- Maximum speed of vehicle7 maps · 100%
- RPM Limiter6 maps · 100%
- RPM limiter (higher threshold)7 maps · 92%
- RPM limiter (lower threshold)2 maps · 77%
Turbo System 19 maps
- Limiter of Turbo pressure8 maps · 100%
- Linearization of impulsive turbo pressure2 maps · 100%
- Wastegate Duty Cycle4 maps · 100%
- Limiter of impulsive turbo pressure2 maps · 96%
- Correction of impulsive turbo pressure f(IAT)90%
- Turbo pressure2 maps · 58%
Rail 12 maps
- Rail pressure12 maps · 100%
Injection System 9 maps
- Injection at full load2 maps · 100%
- Injection base map3 maps · 100%
- Requested Lambda3 maps · 100%
- Lambda for component protection50%
How this pack differs from other Siemens SIMOS 18.1 packs
Named here, but by under half of the 48 Siemens SIMOS 18.1 packs:
- Torque request during take off condition - Reverse Gear 8%
- Torque request - High speed 12%
- Torque request - Low speed 12%
- Torque request during take off condition - Automatic Transmission 44%
Named by at least half of them, but not by this pack (14 of 29, the commonest first):
- Engine load limiter 92%
- Minimum Spark Advance 85%
- Limiter of knocking sensor 81%
- Threshold of end limitation on throttle valve angle 81%
- Limiter of Lambda B 79%
- Airflow mass through throttle valve 77%
- Deactivation turbocharger protection (1=ON, 0=OFF) 75%
- Engine torque correction 75%
- Limiter of Lambda A 75%
- MAP sensor maximum voltage 75%
- Manual Setpoint MAP 75%
- Minimum MAF sensor 75%
- Threshold for turbocharger speed reduction 75%
- Lambda Sensor (1=ON, 0=OFF) 73%
276 maps against the Siemens SIMOS 18.1 median
The 48 Siemens SIMOS 18.1 packs name 256 to 467 maps, median 366; 8% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 112 | 119.5 |
| Spark Advance | 75 | 116 |
| Air Control | 27 | 47 |
| Limiters | 22 | 26.5 |
| Turbo System | 19 | 26 |
| Rail | 12 | 13 |
| Injection System | 9 | 10 |
| Deactivations | 0 | 4 |
Same map list as 1 other SW version
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| SW SC800LB400000 | Audi TTS 2.0 300hp | 276 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.