00001242035901 000010CA598201 Bosch MEVD17.2.H map pack 00002494598290 – BMW X Series 4.4 575hp
00001242035901SW000010CA598201CAL00001242035901_000010CA598201_00002494598290UPG00002494598290This pack holds 140 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW X Series 4.4 575hp · Bosch MEVD17.2.H
More packs: BMW X Series · Bosch MEVD17.2.H
All 140 maps
The percentage beside a name: the share of the 12 Bosch MEVD17.2.H packs that name it too.
Engine Torque 45 maps
- Limiter of Maximum torque13 maps · 100%
- Optimal engine torque2 maps · 100%
- Calculated engine torque30 maps · 42%
Variable Valve Timing (VVT) 31 maps
- Intake11 maps · 100%
- Exhaust - Catalyst protection6 maps · 83%
- Exhaust - High speed2 maps · 83%
- Exhaust - Low speed2 maps · 83%
- Intake - Catalyst protection6 maps · 83%
- Intake - High speed2 maps · 83%
- Intake - Low speed2 maps · 83%
Air Control 17 maps
- Airflow mass through throttle valve100%
- Engine load limiter100%
- Exhaust gas temperature6 maps · 92%
- Reference of maximum throttle valve angle92%
- Requested engine load8 maps · 67%
Limiters 17 maps
- Maximum speed of vehicle2 maps · 100%
- RPM Limiter100%
- RPM limiter (higher threshold)14 maps · 100%
Spark Advance 14 maps
- Spark Advance base map11 maps · 100%
- Optimal Spark Advance3 maps · 92%
Injection System 7 maps
- Injection at full load2 maps · 92%
- Injection base map3 maps · 92%
- Injection enrichment92%
- Lambda for component protection92%
Turbo System 6 maps
- Wastegate Duty Cycle3 maps · 100%
- Overboost duration2 maps · 92%
- Turbine efficiency92%
Rail 3 maps
- Rail pressure2 maps · 92%
- Rail pressure limiter92%
How this pack differs from other Bosch MEVD17.2.H packs
Named here, but by under half of the 12 Bosch MEVD17.2.H packs:
- Calculated engine torque 42%
Named by at least half of them, but not by this pack (14 of 17, the commonest first):
- Torque request during standard condition 83%
- Correction of turbo pressure f(IAT) 75%
- Engine torque correction 75%
- Injection correction 75%
- Lambda Sensor (1=ON, 0=OFF) 75%
- Limiter of Turbo pressure 75%
- Limiter of Turbo pressure f(IAT) 75%
- Limiter of differential Turbo pressure f(APS) 75%
- Limiter of knocking sensor 75%
- MAF sensor slope 75%
- MAP sensor slope 75%
- Maximum engine torque correction f(ECT_T) 75%
- Minimum Spark Advance 75%
- Torque limiter for clutch protection 75%
140 maps against the Bosch MEVD17.2.H median
The 12 Bosch MEVD17.2.H packs name 119 to 310 maps, median 240; 8% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 45 | 45 |
| Variable Valve Timing (VVT) | 31 | 32 |
| Air Control | 17 | 19.5 |
| Limiters | 17 | 26 |
| Spark Advance | 14 | 55 |
| Injection System | 7 | 13 |
| Turbo System | 6 | 25 |
| Rail | 3 | 3 |
| Deactivations | 0 | 20 |
Same map list on 1 more listing of 000010CA598201
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| SW 000010CA598201 | BMW X Series 4.4 575hp | 140 |
Other SW versions on HW 00001242035901
8 SW versions sit on this HW in the archive, 46 files in all: BMW X Series (28), BMW 6 Series (14), BMW M Series (4). The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 000010C86D2801 | BMW X Series 4.4 450hp S63B44B | none listed |
| 000010C86D3C01 | BMW X Series 4.4 450hp S63B44B | none listed |
| 000010C86D6401 | BMW X Series 4.4 450hp | none listed |
| 000010C86D8C02 | BMW X Series 4.4 450hp S63B44B | none listed |
| 000010CA596E01 | BMW X Series 4.4 575hp | 250 maps |
| 000010C86D7801 | BMW 6 Series 4.4 450hp S63B44B | none listed |
| 000010CA595A01 | BMW M Series 4.4 560hp | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.