1037512015 Bosch EDC7UC31 map pack – Hino Engines 8.9 360hp
SW
1037512015Injection System33Turbo System17Engine Torque11Rail5Limiters1
This pack holds 67 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Hino Engines 8.9 360hp · Bosch EDC7UC31
Also written: 1 037 512 015
More packs: Bosch EDC7UC31
All 67 maps
The percentage beside a name: the share of the 43 Bosch EDC7UC31 packs that name it too.
Injection System 33 maps
- Injection timing - Main Injection Base Map 15 maps · 100%
- Injection timing - Main Injection Base Map 24 maps · 86%
- Fuel quantity injected f(RPM,Trq)3 maps · 81%
- Fuel quantity limiter2 maps · 79%
- Injection time6 maps · 72%
- Injection base map9 maps · 70%
- Injection timing - Main Injection Base Map 34 maps · 60%
Turbo System 17 maps
- Turbo pressure8 maps · 86%
- Variable Geometry Duty Cycle8 maps · 51%
- Limiter of Turbo pressure42%
Engine Torque 11 maps
- Limiter of Maximum torque2 maps · 100%
- Torque during cranking f(RPM,ECT)84%
- Torque limiter at gearbox input44%
- Maximum torque for fifth gear35%
- Maximum torque for first gear35%
- Maximum torque for forth gear35%
- Maximum torque for second gear35%
- Maximum torque for third gear35%
- Maximum torque for sixth gear14%
- Maximum torque for reverse gear2%
Rail 5 maps
- Rail pressure2 maps · 91%
- Rail pressure limiter f(RPM,Fuel_Q)2 maps · 91%
- Rail pressure limiter f(RPM,Fuel_T)74%
Limiters 1 map
- Idle engine speed f(ECT)58%
How this pack differs from other Bosch EDC7UC31 packs
Named here, but by under half of the 43 Bosch EDC7UC31 packs:
- Maximum torque for reverse gear 2%
- Maximum torque for sixth gear 14%
- Maximum torque for fifth gear 35%
- Maximum torque for first gear 35%
- Maximum torque for forth gear 35%
- Maximum torque for second gear 35%
- Maximum torque for third gear 35%
- Limiter of Turbo pressure 42%
- Torque limiter at gearbox input 44%
Named by at least half of them, but not by this pack:
- Smoke limitation - Lower Lambda value 81%
- Limiter of Maximum torque f(APS) 77%
- Torque request during standard condition 65%
- Correction of turbo pressure f(IAT) 63%
- Injection timing - Main Injection Base Map 4 58%
- Injection timing - Main Injection Base Map 5 51%
67 maps against the Bosch EDC7UC31 median
The 43 Bosch EDC7UC31 packs name 18 to 78 maps, median 49; 67% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 33 | 19 |
| Turbo System | 17 | 8 |
| Engine Torque | 11 | 14 |
| Rail | 5 | 5 |
| Limiters | 1 | 1 |
| Air Control | 0 | 1 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.