03L906012J_5302 Bosch EDC17C54 map pack – Volkswagen Crafter 2.0 TDI 109hp
03L906012J_5302This pack holds 151 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Volkswagen Crafter 2.0 TDI 109hp · Bosch EDC17C54
More packs: Volkswagen Crafter · Bosch EDC17C54
All 151 maps
The percentage beside a name: the share of the 100 Bosch EDC17C54 packs that name it too.
Injection System 68 maps
- Fuel quantity injected f(RPM,Trq)9 maps · 100%
- Injection correction3 maps · 100%
- Injection time100%
- Injection timing - Main Injection Base Map 139 maps · 100%
- Smoke limitation - Lower Lambda value7 maps · 100%
- Injection correction f(Air_T)2 maps · 93%
- Injection correction f(ECT)93%
- Injection timing - Main Injection Base Map 26 maps · 66%
Turbo System 31 maps
- Limiter of Turbo pressure f(APS)100%
- Turbo pressure18 maps · 100%
- Limiter of Turbo pressure f(IAT)94%
- Variable geometry (VGT) or wastegate (WG) control11 maps · 44%
Engine Torque 24 maps
- Limiter of Maximum torque f(APS)100%
- Maximum torque for fifth gear100%
- Maximum torque for first gear100%
- Maximum torque for second gear100%
- Maximum torque for sixth gear100%
- Maximum torque for third gear100%
- Torque during cranking f(RPM,ECT)2 maps · 100%
- Maximum torque for forth gear99%
- Maximum torque for reverse gear99%
- Limiter of Maximum torque4 maps · 94%
- Torque request during take off condition2 maps · 94%
- Maximum torque for eighth gear92%
- Maximum torque for nineth gear92%
- Maximum torque for seventh gear92%
- Torque request during take off condition - First Gear11%
- Torque request during take off condition - Forth Gear11%
- Torque request during take off condition - Second Gear11%
- Torque request during take off condition - Third Gear11%
- Torque request during take off condition - Reverse Gear4%
Rail 11 maps
- Rail pressure6 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)2 maps · 100%
- Rail pressure limiter f(RPM,Fuel_T)3 maps · 100%
Deactivations 7 maps
- EGR Valve6 maps · 94%
- Speed limiters (switch)93%
Limiters 7 maps
- Idle engine speed f(ECT)6 maps · 100%
- Maximum speed of vehicle89%
Air Control 3 maps
- Exhaust gas temperature3 maps · 94%
How this pack differs from other Bosch EDC17C54 packs
Named here, but by under half of the 100 Bosch EDC17C54 packs:
- Torque request during take off condition - Reverse Gear 4%
- Torque request during take off condition - First Gear 11%
- Torque request during take off condition - Forth Gear 11%
- Torque request during take off condition - Second Gear 11%
- Torque request during take off condition - Third Gear 11%
- Variable geometry (VGT) or wastegate (WG) control 44%
151 maps against the Bosch EDC17C54 median
The 100 Bosch EDC17C54 packs name 80 to 158 maps, median 149; 55% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 68 | 66 |
| Turbo System | 31 | 31 |
| Engine Torque | 24 | 24 |
| Rail | 11 | 11 |
| Deactivations | 7 | 7 |
| Limiters | 7 | 7 |
| Air Control | 3 | 3 |
Same map list as 2 other SW versions
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| Calibration 03L906012A_9977 | Volkswagen Crafter 2.0 TDI 109hp | 151 |
| SW 1037531689 | Volkswagen Crafter 2.0 TDI 109hp | 151 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.