Bosch MED9.6.1 map pack – Opel Insignia 2.0 220hp
Engine Torque19Spark Advance16Injection System6Air Control5Limiters5Turbo System2Rail2
This pack holds 55 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Opel Insignia 2.0 220hp · Bosch MED9.6.1
More packs: Opel Insignia · Bosch MED9.6.1
All 55 maps
The percentage beside a name: the share of the 8 Bosch MED9.6.1 packs that name it too.
Engine Torque 19 maps
- Limiter of Maximum torque2 maps · 100%
- Optimal engine torque100%
- Calculated engine torque4 maps · 88%
- Torque request during take off condition11 maps · 88%
- Torque request during take off condition - Reverse Gear25%
Spark Advance 16 maps
- Optimal Spark Advance8 maps · 100%
- Spark Advance base map8 maps · 88%
Injection System 6 maps
- Lambda for component protection2 maps · 100%
- Requested Lambda100%
- Injection base map25%
- Injection correction f(Air_T)2 maps · 25%
Air Control 5 maps
- Airflow mass through throttle valve100%
- Requested engine load100%
- Throttle valve - operating angle100%
- Throttle valve f(Accelerator pedal)100%
- Threshold of end limitation on throttle valve angle38%
Limiters 5 maps
- RPM limiter (higher threshold)100%
- RPM Limiter4 maps · 88%
Turbo System 2 maps
- Limiter of Turbo pressure f(APS)25%
- Linearization of impulsive turbo pressure25%
Rail 2 maps
- Rail pressure100%
- Rail pressure limiter f(RPM,Fuel_Q)38%
How this pack differs from other Bosch MED9.6.1 packs
Named here, but by under half of the 8 Bosch MED9.6.1 packs:
- Injection base map 25%
- Injection correction f(Air_T) 25%
- Limiter of Turbo pressure f(APS) 25%
- Linearization of impulsive turbo pressure 25%
- Torque request during take off condition - Reverse Gear 25%
- Rail pressure limiter f(RPM,Fuel_Q) 38%
- Threshold of end limitation on throttle valve angle 38%
Named by at least half of them, but not by this pack:
- Exhaust 88%
- Intake 88%
- Lambda Sensor (1=ON, 0=OFF) 88%
- Catalytic converter Diagnosis (1=ON, 0=OFF) 75%
- Exhaust - Catalyst protection 75%
- Exhaust gas temperature 75%
- Injection correction 75%
- Maximum speed of vehicle 62%
- RPM limiter (lower threshold) 62%
- Rail pressure limiter f(RPM,Fuel_T) 62%
- Spark advance during cranking 62%
- Torque request during standard condition 62%
- Torque request during take off condition - Automatic Transmission 50%
- Torque request for Sport mode functionality A 50%
55 maps against the Bosch MED9.6.1 median
The 8 Bosch MED9.6.1 packs name 53 to 84 maps, median 68.5; 12% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 19 | 13.5 |
| Spark Advance | 16 | 3 |
| Injection System | 6 | 4.5 |
| Air Control | 5 | 6 |
| Limiters | 5 | 23 |
| Turbo System | 2 | 0 |
| Rail | 2 | 4 |
| Deactivations | 0 | 5 |
| Variable Valve Timing (VVT) | 0 | 4.5 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.