03F906070GN_2697 Siemens SIMOS10.24 map pack – Audi A1 1.2 86hp
CAL
03F906070GN_2697Engine Torque24Turbo System14Spark Advance13Limiters9Injection System6Air Control4Rail2
This pack holds 72 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A1 1.2 86hp · Siemens SIMOS10.24
More packs: Audi A1 · Siemens SIMOS10.24
All 72 maps
Engine Torque 24 maps
- Calculated engine torque2 maps
- Limiter of Maximum torque9 maps
- Optimal engine torque
- Torque limiter for clutch protection2 maps
- Torque request during standard condition9 maps
- Torque request during take off condition
Turbo System 14 maps
- Limiter of Turbo pressure3 maps
- Limiter of Turbo pressure f(APS)
- Maximum turbocharger speed3 maps
- Turbine efficiency
- Turbo pressure4 maps
- Wastegate Duty Cycle2 maps
Spark Advance 13 maps
- Limiter of knocking sensor8 maps
- Optimal Spark Advance
- Spark Advance base map3 maps
- Spark advance during cranking
Limiters 9 maps
- Idle engine speed f(ECT)
- RPM Limiter8 maps
Injection System 6 maps
- Injection at full load
- Injection base map3 maps
- Injection correction
- Requested Lambda
Air Control 4 maps
- Engine load limiter2 maps
- Exhaust gas temperature
- Requested engine load
Rail 2 maps
- Rail pressure2 maps
72 maps against the Siemens SIMOS10.24 median
The archive has only 2 Siemens SIMOS10.24 packs, with 35 to 72 maps.
Same map list as 1 other SW version
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| Calibration 03F906070GH_2655 | Audi A1 1.2 105hp · Siemens SIMOS10.13 | 72 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.