0281013052 1037377760 Bosch EDC16CP35 map pack – BMW X Series 3.0 D 218hp
0281013052SW1037377760CAL0089QZ0008This pack holds 94 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW X Series 3.0 D 218hp · Bosch EDC16CP35
Also written: 0 281 013 052 · 1 037 377 760
More packs: BMW X Series · Bosch EDC16CP35
All 94 maps
The percentage beside a name: the share of the 95 Bosch EDC16CP35 packs that name it too.
Injection System 35 maps
- Fuel quantity injected f(RPM,Trq)6 maps · 100%
- Smoke limitation - Lower Lambda value13 maps · 100%
- Fuel quantity limiter3 maps · 96%
- Injection timing - Main Injection Base Map 12 maps · 89%
- Injection timing - Main Injection Base Map 23 maps · 77%
- Injection time75%
- Injection timing - Main Injection Base Map 52 maps · 61%
- Injection timing - Main Injection Base Map 455%
- Injection timing - Main Injection Base Map 32 maps · 47%
- Injection timing - Main Injection Base Map in regeneration2 maps · 26%
Engine Torque 22 maps
- Limiter of Maximum torque7 maps · 100%
- Maximum torque for fifth gear100%
- Maximum torque for first gear100%
- Maximum torque for forth gear100%
- Maximum torque for reverse gear100%
- Maximum torque for second gear100%
- Maximum torque for sixth gear100%
- Maximum torque for third gear100%
- Torque during cranking f(RPM,ECT)2 maps · 100%
- Torque request during standard condition100%
- Maximum torque during shift gear2 maps · 94%
- Torque request during take off condition93%
- Maximum torque limiter f(EGT)40%
- Maximum torque limiter in regeneration mode37%
Turbo System 14 maps
- Limiter of Turbo pressure f(APS)100%
- Turbo pressure5 maps · 100%
- Variable Geometry Duty Cycle5 maps · 100%
- Limiter of Turbo pressure95%
- Turbo pressure in regeneration2 maps · 32%
Rail 9 maps
- Rail pressure4 maps · 100%
- Rail pressure limiter f(RPM,Fuel_T)2 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)3 maps · 94%
Limiters 7 maps
- Maximum speed of vehicle3 maps · 100%
- Idle engine speed f(ECT)4 maps · 54%
Air Control 5 maps
- Air quantity - Base map5 maps · 84%
Deactivations 2 maps
- EGR Valve2 maps · 47%
How this pack differs from other Bosch EDC16CP35 packs
Named here, but by under half of the 95 Bosch EDC16CP35 packs:
- Injection timing - Main Injection Base Map in regeneration 26%
- Turbo pressure in regeneration 32%
- Maximum torque limiter in regeneration mode 37%
- Maximum torque limiter f(EGT) 40%
- EGR Valve 47%
- Injection timing - Main Injection Base Map 3 47%
94 maps against the Bosch EDC16CP35 median
The 95 Bosch EDC16CP35 packs name 59 to 122 maps, median 80; 84% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 35 | 28 |
| Engine Torque | 22 | 18 |
| Turbo System | 14 | 14 |
| Rail | 9 | 8 |
| Limiters | 7 | 5 |
| Air Control | 5 | 5 |
| Deactivations | 2 | 0 |
Same map list as 1 other SW version
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| SW 1037379334 | BMW X Series 3.0 D 218hp | 94 |
Other SW versions on HW 0281013052
2 SW versions sit on this HW in the archive, 2 files in all. The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 1037379334 | BMW X Series 3.0 D 218hp M57N2 | 94 maps |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.