0261S02371 1037395111 Bosch MED9.1 map pack – Audi RS6 5.0 580hp
0261S02371SW1037395111CAL4F1910552D_0030This pack holds 96 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi RS6 5.0 580hp · Bosch MED9.1
Also written: 1 037 395 111
More packs: Audi RS6 · Bosch MED9.1
All 96 maps
The percentage beside a name: the share of the 152 Bosch MED9.1 packs that name it too.
Limiters 31 maps
- RPM Limiter10 maps · 99%
- RPM limiter (higher threshold)6 maps · 97%
- Maximum speed of vehicle15 maps · 91%
Spark Advance 16 maps
- Spark Advance base map8 maps · 99%
- Optimal Spark Advance 18 maps · 11%
Engine Torque 12 maps
- Optimal engine torque2 maps · 100%
- Calculated engine torque2 maps · 69%
- Torque monitoring3 maps · 49%
- Torque request - Low speed43%
- Torque request - High speed32%
- Torque request - Reverse Gear14%
- Torque request during take off condition9%
- Torque request - High speed Sport8%
Injection System 12 maps
- Requested Lambda99%
- Injection base map6 maps · 74%
- Injection enrichment61%
- Lambda for component protection2 maps · 53%
- Injection correction f(ECT)2 maps · 6%
Turbo System 10 maps
- Limiter of Turbo pressure79%
- Turbo pressure3 maps · 79%
- Limiter of impulsive turbo pressure2 maps · 75%
- Limiter of steady turbo pressure2 maps · 68%
- Linearization of impulsive turbo pressure56%
- Limiter of Turbo pressure f(APS)53%
Air Control 7 maps
- Requested engine load2 maps · 99%
- Airflow mass through throttle valve95%
- Threshold of end limitation on throttle valve angle95%
- Throttle valve - operating angle95%
- Throttle valve f(Accelerator pedal)85%
- Engine load limiter56%
Rail 6 maps
- Rail pressure5 maps · 67%
- Rail pressure limiter f(RPM,Fuel_T)38%
Deactivations 2 maps
- Catalytic converter Diagnosis (1=ON, 0=OFF)2 maps · 62%
How this pack differs from other Bosch MED9.1 packs
Named here, but by under half of the 152 Bosch MED9.1 packs:
- Injection correction f(ECT) 6%
- Torque request - High speed Sport 8%
- Torque request during take off condition 9%
- Optimal Spark Advance 1 11%
- Torque request - Reverse Gear 14%
- Torque request - High speed 32%
- Rail pressure limiter f(RPM,Fuel_T) 38%
- Torque request - Low speed 43%
- Torque monitoring 49%
Named by at least half of them, but not by this pack (14 of 19, the commonest first):
- Spark advance during cranking 86%
- Desired torque at wheel 75%
- Slow incremental factor of turbo pressure 72%
- Correction of turbo pressure f(IAT) 72%
- Correction of slow incremental factor of turbo pressure 71%
- Fast reduction factor of turbo pressure 71%
- Lambda Sensor (1=ON, 0=OFF) 66%
- Correction of impulsive turbo pressure f(IAT) 65%
- Injection correction 65%
- Exhaust gas temperature 64%
- Limiter of Maximum torque 56%
- Torque request during take off condition - Fifth Gear 53%
- Torque request during take off condition - First Gear 53%
- Torque request during take off condition - Forth Gear 53%
96 maps against the Bosch MED9.1 median
The 152 Bosch MED9.1 packs name 27 to 213 maps, median 94.5; 51% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Limiters | 31 | 17 |
| Spark Advance | 16 | 22 |
| Engine Torque | 12 | 15 |
| Injection System | 12 | 11 |
| Turbo System | 10 | 20 |
| Air Control | 7 | 9 |
| Rail | 6 | 6 |
| Deactivations | 2 | 2 |
Other SW versions on HW 0261S02371
2 SW versions sit on this HW in the archive, 3 files in all. The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 1037398562 | Audi RS6 5.0 V10 40v Biturbo 579hp | 88 maps |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.