FS7A-12A650-CVD FS7A-12A650-CSC Delphi DCM6.1 map pack FS7A-14C204-DXD – Ford Mondeo 2.0 150hp
FS7A-12A650-CVDSWFS7A-12A650-CSCCALFS7A-14C204-DXDThis pack holds 235 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Ford Mondeo 2.0 150hp · Delphi DCM6.1
Also written: FS7A 12A650 CVD · FS7A12A650CVD · FS7A 12A650 CSC · FS7A12A650CSC · FS7A 14C204 DXD · FS7A14C204DXD
More packs: Ford Mondeo · Delphi DCM6.1
All 235 maps
The percentage beside a name: the share of the 24 Delphi DCM6.1 packs that name it too.
Injection System 95 maps
- Fuel quantity injected f(RPM,Trq)35 maps · 100%
- Injection time3 maps · 100%
- Injection timing - Main Injection Base Map 127 maps · 100%
- Injection timing - Main Injection Base Map 217 maps · 100%
- Smoke limitation - Lower Lambda value10 maps · 100%
- Injection timing limiter - Main injection base map3 maps · 62%
Engine Torque 63 maps
- Calculated engine torque17 maps · 100%
- Limiter of Maximum torque15 maps · 100%
- Limiter of Maximum torque f(APS)100%
- Maximum torque for fifth gear100%
- Maximum torque for first gear100%
- Maximum torque for forth gear100%
- Maximum torque for reverse gear100%
- Maximum torque for second gear100%
- Maximum torque for sixth gear2 maps · 100%
- Maximum torque for third gear100%
- Torque during cranking f(RPM,ECT)4 maps · 100%
- Torque request during standard condition100%
- Torque request during take off condition8 maps · 100%
- Engine torque correction2 maps · 62%
- Engine torque correction in regeneration mode62%
- Maximum engine torque correction f(EGT_T)62%
- Maximum engine torque correction f(eng_T)62%
- Maximum engine torque correction f(fuel_T)62%
- Maximum engine torque correction f(oil_T)62%
- Torque monitoring2 maps · 50%
Turbo System 39 maps
- Limiter of Turbo pressure7 maps · 100%
- Limiter of Turbo pressure f(APS)3 maps · 100%
- Turbo pressure14 maps · 100%
- Variable Geometry Duty Cycle15 maps · 100%
Rail 20 maps
- Rail pressure14 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)100%
- Rail pressure limiter f(RPM,Fuel_T)5 maps · 100%
Air Control 9 maps
- Air quantity - Base map9 maps · 100%
Deactivations 6 maps
- EGR Valve6 maps · 58%
Limiters 3 maps
- Idle engine speed f(ECT)2 maps · 100%
- Maximum speed of vehicle67%
How this pack differs from other Delphi DCM6.1 packs
Every name here is in at least half of the 24 Delphi DCM6.1 packs, and no name that half of them share is missing.
235 maps against the Delphi DCM6.1 median
The 24 Delphi DCM6.1 packs name 184 to 259 maps, median 237; 33% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 95 | 106 |
| Engine Torque | 63 | 63 |
| Turbo System | 39 | 33 |
| Rail | 20 | 19 |
| Air Control | 9 | 9 |
| Deactivations | 6 | 6 |
| Limiters | 3 | 3 |
Same map list as 3 other SW versions
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| SW FS7A-12A650-CSB | Ford Mondeo 2.0 150hp | 235 |
| SW FV41-12A650-TM | Ford Focus ST 2.0 185hp | 238 |
| HW FV41-14C204-YG | Ford Kuga 2.0 180hp · Delphi DCM 6.1 | 238 |
Other SW versions on HW FS7A-12A650-CVD
3 SW versions sit on this HW in the archive, 5 files in all. The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| DS71-12A650-UB | Ford Mondeo 2.0 150hp | none listed |
| FS7A-12A650-CSB | Ford Mondeo 2.0 150hp | 211 maps |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.