1037391390 Bosch EDC16CP31 map pack – Dodge Nitro 2.8 CRD V6 177hp
1037391390This pack holds 61 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Dodge Nitro 2.8 CRD V6 177hp · Bosch EDC16CP31
Also written: 1 037 391 390
More packs: Dodge Nitro · Bosch EDC16CP31
All 61 maps
The percentage beside a name: the share of the 238 Bosch EDC16CP31 packs that name it too.
Injection System 16 maps
- Fuel quantity injected f(RPM,Trq)100%
- Injection time99%
- Injection timing - Main Injection Base Map 13 maps · 99%
- Injection timing - Main Injection Base Map 22 maps · 97%
- Fuel quantity limiter5 maps · 91%
- Smoke limitation - Lower Lambda value39%
- Injection timing - Main Injection Base Map in regeneration3 maps · 5%
Rail 16 maps
- Rail pressure2 maps · 100%
- Rail pressure limiter f(RPM,Fuel_Q)97%
- Rail pressure limiter13 maps · 6%
Engine Torque 12 maps
- Maximum torque for first gear100%
- Torque during cranking f(RPM,ECT)100%
- Torque request during standard condition2 maps · 100%
- Maximum torque for fifth gear99%
- Maximum torque for forth gear99%
- Maximum torque for reverse gear99%
- Maximum torque for second gear99%
- Maximum torque for sixth gear99%
- Maximum torque for third gear99%
- Torque limiter at gearbox input87%
- Limiter of Maximum torque f(APS)4%
Turbo System 10 maps
- Turbo pressure2 maps · 100%
- Variable geometry (VGT) or wastegate (WG) control6 maps · 89%
- Limiter of Turbo pressure2 maps · 45%
Limiters 4 maps
- Maximum speed of vehicle52%
- Idle engine speed f(ECT)3 maps · 5%
Deactivations 3 maps
- EGR Valve2 maps · 7%
- Speed limiters (switch)6%
How this pack differs from other Bosch EDC16CP31 packs
Named here, but by under half of the 238 Bosch EDC16CP31 packs:
- Limiter of Maximum torque f(APS) 4%
- Idle engine speed f(ECT) 5%
- Injection timing - Main Injection Base Map in regeneration 5%
- Rail pressure limiter 6%
- Speed limiters (switch) 6%
- EGR Valve 7%
- Smoke limitation - Lower Lambda value 39%
- Limiter of Turbo pressure 45%
Named by at least half of them, but not by this pack:
- Rail pressure limiter f(RPM,Fuel_T) 95%
- Injection timing - Main Injection Base Map 3 94%
- Maximum torque for seventh gear 76%
- Limiter of Turbo pressure f(APS) 74%
- EGR control - Closing percentage 51%
61 maps against the Bosch EDC16CP31 median
The 238 Bosch EDC16CP31 packs name 22 to 76 maps, median 43; 89% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Injection System | 16 | 13 |
| Rail | 16 | 5 |
| Engine Torque | 12 | 12 |
| Turbo System | 10 | 7 |
| Limiters | 4 | 1 |
| Deactivations | 3 | 0 |
| Air Control | 0 | 2 |
Same map list as 6 other SW versions
These packs have exactly the map names of this one. A pack still belongs to its own software, so pick the one whose number matches your read.
| Number | Listed for | Maps |
|---|---|---|
| SW 1037391247 | Jeep Cherokee 2.8 CRD 177hp | 61 |
| SW 1037391254 | Jeep Wrangler 2.8 177hp | 61 |
| SW 1037394846 | Jeep Cherokee 2.8 16 VCRD 177hp | 62 |
| SW 1037394847 | Jeep Cherokee 2.8 CRD 177hp | 61 |
| SW 1037396185 | Jeep Wrangler 2.8 CRD 177hp | 62 |
| SW 1037396186 | Jeep Wrangler 2.8 177hp | 62 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.