0261207941 1037366871 Bosch ME7.5 map pack – Audi A4 1.8 20V TURBO 190hp
HW
0261207941SW1037366871CAL8E0909518AH_0002Engine Torque21Deactivations18Spark Advance15Turbo System14Air Control11Injection System6Limiters4
This pack holds 89 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
Audi A4 1.8 20V TURBO 190hp · Bosch ME7.5
Also written: 0 261 207 941 · 1 037 366 871
More packs: Audi A4 · Bosch ME7.5
All 89 maps
The percentage beside a name: the share of the 137 Bosch ME7.5 packs that name it too.
Engine Torque 21 maps
- Optimal engine torque98%
- Torque monitoring11 maps · 31%
- Torque request during standard condition6 maps · 20%
- Calculated engine torque3 maps · 15%
Deactivations 18 maps
- Lambda Sensor (1=ON, 0=OFF)17 maps · 80%
- Catalytic converter Diagnosis (1=ON, 0=OFF)35%
Spark Advance 15 maps
- Spark Advance base map8 maps · 98%
- Spark advance during cranking62%
- Limiter of knocking sensor4 maps · 35%
- Spark advance correction f(Air_T)2 maps · 24%
Turbo System 14 maps
- Slow incremental factor of turbo pressure3 maps · 84%
- Limiter of Turbo pressure3 maps · 80%
- Wastegate Duty Cycle62%
- Turbo pressure2 maps · 41%
- Correction of turbo pressure f(IAT)2 maps · 39%
- Limiter of Turbo pressure f(IAT)3 maps · 21%
Air Control 11 maps
- Requested engine load97%
- Throttle valve - operating angle97%
- Airflow mass through throttle valve93%
- Reference of maximum throttle valve angle86%
- Threshold of end limitation on throttle valve angle77%
- Throttle valve f(Accelerator pedal)72%
- Exhaust gas temperature2 maps · 60%
- MAF scaling38%
- MAF sensor offset32%
- MAF sensor slope18%
Injection System 6 maps
- Requested Lambda96%
- Phase of injection2 maps · 74%
- Lambda for component protection73%
- Injection at partial load66%
- Injection correction61%
Limiters 4 maps
- RPM Limiter96%
- RPM limiter (higher threshold)74%
- RPM limiter (lower threshold)2 maps · 46%
How this pack differs from other Bosch ME7.5 packs
Named here, but by under half of the 137 Bosch ME7.5 packs:
- Calculated engine torque 15%
- MAF sensor slope 18%
- Torque request during standard condition 20%
- Limiter of Turbo pressure f(IAT) 21%
- Spark advance correction f(Air_T) 24%
- Torque monitoring 31%
- MAF sensor offset 32%
- Catalytic converter Diagnosis (1=ON, 0=OFF) 35%
- Limiter of knocking sensor 35%
- MAF scaling 38%
- Correction of turbo pressure f(IAT) 39%
- Turbo pressure 41%
- RPM limiter (lower threshold) 46%
Named by at least half of them, but not by this pack:
- Torque request during take off condition 84%
- Fast reduction factor of turbo pressure 81%
- Correction of slow incremental factor of turbo pressure 72%
- Maximum speed of vehicle 68%
- Optimal Spark Advance 66%
- Linearization of impulsive turbo pressure 59%
- Limiter of steady turbo pressure 53%
- Limiter of impulsive turbo pressure 50%
89 maps against the Bosch ME7.5 median
The 137 Bosch ME7.5 packs name 12 to 108 maps, median 49; 91% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 21 | 4 |
| Deactivations | 18 | 4 |
| Spark Advance | 15 | 5 |
| Turbo System | 14 | 11 |
| Air Control | 11 | 8 |
| Injection System | 6 | 6 |
| Limiters | 4 | 8 |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.