00001A830A3B02 00001A841D0A00 Bosch MEVD17.2.G map pack 129 maps – BMW M Series 3.0 431hp
00001A830A3B02SW00001A841D0A00CAL00001A830A3B02_00001A841D0A00_000038AA1D0AEAUPG000038AA1D0AEAThis pack holds 129 maps of this exact software version, each with its X/Y axes and factor — ready to import into WinOLS. The full list is below.
BMW M Series 3.0 431hp · Bosch MEVD17.2.G
More packs: BMW M Series · Bosch MEVD17.2.G
All 129 maps
The percentage beside a name: the share of the 47 Bosch MEVD17.2.G packs that name it too.
Engine Torque 44 maps
- Limiter of Maximum torque15 maps · 100%
- Optimal engine torque2 maps · 100%
- Torque limiter at gearbox input3 maps · 70%
- Calculated engine torque24 maps · 6%
Variable Valve Timing (VVT) 29 maps
- Exhaust - Catalyst protection6 maps · 100%
- Exhaust - High speed2 maps · 100%
- Exhaust - Low speed2 maps · 100%
- Intake9 maps · 100%
- Intake - Catalyst protection6 maps · 100%
- Intake - High speed2 maps · 100%
- Intake - Low speed2 maps · 98%
Limiters 27 maps
- Maximum speed of vehicle3 maps · 100%
- RPM Limiter7 maps · 100%
- RPM limiter (higher threshold)17 maps · 100%
Spark Advance 12 maps
- Optimal Spark Advance3 maps · 81%
- Spark Advance base map9 maps · 70%
Air Control 9 maps
- Airflow mass through throttle valve100%
- Requested engine load8 maps · 21%
Turbo System 5 maps
- Limiter of Turbo pressure100%
- Wastegate Duty Cycle3 maps · 100%
- Turbo pressure6%
Injection System 3 maps
- Injection base map2 maps · 100%
- Lambda for component protection85%
How this pack differs from other Bosch MEVD17.2.G packs
Named here, but by under half of the 47 Bosch MEVD17.2.G packs:
- Calculated engine torque 6%
- Turbo pressure 6%
- Requested engine load 21%
Named by at least half of them, but not by this pack (14 of 34, the commonest first):
- Engine load limiter 91%
- Engine torque correction 91%
- Exhaust gas temperature 91%
- Injection correction 91%
- Limiter of differential Turbo pressure f(APS) 91%
- MAF sensor slope 91%
- Rail pressure limiter f(RPM,Fuel_Q) 91%
- Torque monitoring 91%
- Turbine efficiency 91%
- Rail pressure 89%
- Torque request during standard condition 89%
- Lambda Sensor (1=ON, 0=OFF) 87%
- Injection enrichment 85%
- Spark advance at low load 85%
129 maps against the Bosch MEVD17.2.G median
The 47 Bosch MEVD17.2.G packs name 76 to 257 maps, median 208; 6% of them name fewer than this one.
| Category | This pack | Median pack |
|---|---|---|
| Engine Torque | 44 | 48 |
| Variable Valve Timing (VVT) | 29 | 32 |
| Limiters | 27 | 30 |
| Spark Advance | 12 | 18 |
| Air Control | 9 | 23 |
| Turbo System | 5 | 27 |
| Injection System | 3 | 11 |
| Deactivations | 0 | 19 |
| Rail | 0 | 5 |
Other SW versions on HW 00001A830A3B02
5 SW versions sit on this HW in the archive, 96 files in all: BMW M Series (94), BMW M4-SERIES (1), BMW 3 Series (1). The last column shows which have a map pack.
| SW | Listed for | Map pack |
|---|---|---|
| 00001A841D1401 | BMW M Series 3.0 431hp S55B30 | none listed |
| 00001A841D1E01 | BMW M Series 3.0 431hp S55B30 | none listed |
| 00001A841D2801 | BMW M Series 3.0 370hp N55B30T0 | none listed |
| 00001A841D2D02 | BMW M Series 3.0 431hp S55B30 | none listed |
Map definitions only — no tuned values; the pack fits this software version only. Original read only (no full backup or EEPROM). A digital file: all sales are final — no refunds.