S180037007Z9 81IU1MGE Siemens M3C original ECU file – Ducati Monster 0.7 80hp
S180037007Z9CAL81IU1MGE- Vehicle
- Ducati Monster
- Engine
- 0.7 80hp
- ECU
- Siemens M3C
- HW
- S180037007Z9
- Calibration
- 81IU1MGE
2 files carry these same numbers, for this same car, engine and ECU: 0gwd62t. This listing cannot tell them apart.
HW numbers next to S180037007Z9
The closest HW numbers in the archive, by spelling. They are other files, not equivalents. Worth a look when a digit may have been misread.
| HW | Listed for |
|---|---|
| S180037030Z9 | Ducati Monster 0.7 80hp |
| S180037040Z9 | TGB Blade 500 40hp |
Other numbers for the Ducati Monster 0.7 80hp
12 files cover exactly this car and engine, on Siemens M3C (12). If your ECU reads differently from this page, 2 of the others:
This ECU and car in figures
Siemens M3C: 103 files, 18 SW numbers, 3 with a map pack. Makes: Ducati (91), CAN-AM (10), KTM (1), TGB (1). Most listed: Ducati Monster (55), Ducati Scrambler (26), Ducati Hypermotard (9), CAN-AM Outlander (7).
Ducati Monster: 154 files. ECU types: Siemens M3C (55), Continental M3D (51), Bosch ME17.9.21 (15), Magneti Marelli IAW 5AM (14). Engine codes: Testastretta 11 (13), D9903F26DUCATI M900 (1).
What you get
- The original (stock) read of this ECU as listed, as a ready-to-use .bin file by e-mail.
- File sizes differ between tools and read methods — check that the numbers match your ECU before buying.
- Original read only: no full backup, EEPROM or tuned file.
- A digital file: all sales are final — no refunds. Terms of sale